|
Motor Driver Evaluation Kit NEVB-MTR1-t01-1.1.0
Firmware for NEVB-MTR1-KIT1 for trapezoidal control of BLDC motors using Hall-effect sensors
|
| ▼Motor Configuration Definitions | Collection of definitions that control system behavior |
| User Settable Defines | These defines can be modified by the user |
| ▼System Constant Defines | These defines should not be modified by the user |
| PLL Post-scaler Macros | PLL post-scaler selection bits (PLLTM1:0) for High Speed Timer in PLLFRQ |
| Deadtime Pre-scaler Macros | Deadtime generator pre-scaler selection bits (DTPS41:0) in TCCR4B |
| Timer 1 (and 3) Clock Select Macros | Timer 1 (and 3) clock selection bits (CS12:0/CS12:0) for TCCR1B/TCCR3B |
| Timer 4 Clock Select Macros | Timer 4 clock selection bits (CS43:0) for TCCR4B |
| ADC Multiplexer Select Macros | ADC multiplexer selection bits (MUX5 and MUX4:0) in ADCSRB and ADMUX respectively |
| ADC Pre-scaler Macros | ADC pre-scaler selection bits (ADPS2:0) in ADCSRA |
| ADC Reference Macros | ADC voltage reference selection bits (REFS1:0) in ADMUX |
| ADC Auto Trigger Macros | ADC auto trigger source selection bits (ADTS3:0) in ADCSRB |
| Derived Defines | These defines are derived from the user settable defines |